Petra Maier studierte an der Technischen Hochschule Wildau „Physikalische Technik“ und promovierte 2002 an der Loughborough University in Großbritannien in Materialwissenschaften auf dem Gebiet der Korngrenzensegregation in Stahl. Nach ihrer Promotion arbeitete sie an der Technischen Hochschule Wildau als Postdoktorandin unter der Leitung von Prof. Asta Richter mit Schwerpunkt auf mechanischen Eigenschaften mittels Nanoindentaion. Von 2004 bis 2006 arbeitete sie als wissenschaftliche Mitarbeiterin im MagIC unter der Aufsicht von Dr. Norbert Hort am Helmholtz-Zentrum Geesthacht und war Teil des Instituts für Materialforschung unter der Leitung von Prof. Karl Ulrich Kainer. Ihr Fokus lag auf dem Magnesiumrecycling und der Entwicklung von Hochtemperaturlegierungen. Von 2006 bis 2008 war Petra Maier wissenschaftliche Mitarbeiterin an der Technischen Universität Berlin am Institut für Werkstoffwissenschaften und -technologien im Fachbereich für Werkstofftechnik von Prof. Claudia Fleck. Zu ihren Forschungsschwerpunkten gehörte die Korrosionsermüdung von Magnesium. Seit 2008 ist Petra Maier Professorin für Werkstoff- und Fertigungstechnik an der Fakultät für Maschinenbau der Hochschule Stralsund. Sie arbeitet auf dem Gebiet der biologisch abbaubaren Implantate auf Mg-Basis. Ihre Forschung konzentriert sich auf Korrosion unter Spannung und Rissausbreitung, hauptsächlich im Bereich innovativer Magnesium-Selten Erden-Legierungen. Darüber hinaus liegen ihre Schwerpunkte auf der Korrelation der Mikrostruktur mit mechanischen Eigenschaften, der Fraktographie sowie umformtechnischen Fertigungsverfahren.

Petra Maier studied “Physical Technologies” at the Technical University of Applied Sciences Wildau and received her doctoral degree from Loughborough University, UK, in 2002 in Materials Science, in the field of grain boundary segregation in steel. After completing her PhD she worked at the University of Applied Sciences Wildau, Germany, as a postdoctoral fellow under supervision of Prof. Asta Richter with focus on mechanical properties by nanoindentaion. From 2004 to 2006 she worked as a research associate in the MagIC under supervision of Dr. Norbert Hort at the Helmholtz-Zentrum Geesthacht, Germany, being a part of the Institute of Materials Research lead by Prof. Karl Ulrich Kainer. Her focus was Magnesium recycling and high temperature alloy development. From 2006 to 2008 Petra Maier was a research associate at the Technical University Berlin, Germany, in the Institute of Material Sciences and Technologies, Department of Materials Engineering of Prof. Claudia Fleck. There, her research specialties included corrosion fatigue on Magnesium. Since 2008 Petra Maier is a professor of Materials and Production Engineering in the School of Mechanical Engineering at the University of Applied Sciences Stralsund in Germany. She enjoys working in the field of Mg-based biodegradable implants. Her research is focused on corrosion under stress and crack propagation, mostly on innovative Magnesium-Rare Earth alloys. Furthermore, she focuses on the correlation of the microstructure with mechanical properties, fractography and forming as manufacturing process.

ResearchGate Profil

Google Scholar Profil

• Bioresorbierbare Mg-Legierungen für biomedizinische Anwendungen
• Spannungskorrosion und Ermüdungsverhalten von Magnesiumlegierungen
• Kriechverhalten warmfester Mg-Werkstoffe
• Bruchverhalten von Werkstoffen (Metalle, insbesondere Leichtbauwerkstoffe)
• Einfluss des mikrostrukturellen Aufbaus auf das Festigkeitsverhalten von Bauteilen (statisch, quasistatisch, dynamisch)
• Optimierung von Faserverbundkunststoffen, Reparaturkonzepte
• Werkstoffverhalten beim komplexen Kalt- sowie Warmumformen

Leistungsangebot:

• Ermittlung mechanischer Werkstoffkennwerte nach DIN (Zugversuch, 3- und 4 Punktbiegeversuch, Druckversuch (Fließkurven), Wöhlerversuch, Härtemessung, Kerbschlagbiegeversuch) bei Metallen und Kunststoffen
• Ermittlung mechanischer Werkstoffkennwerte im Zug- und Druckversuch von -60°C bis 1200°C
• Schadensfallgutachten (Ermüdungs- und Spannungsbruch, Korrosion, Überlast)
• Untersuchungen des inneren Aufbaus der Werkstoffe zum Nachweis der laut DIN und Behandlung geforderter Gefüge mittels Lichtmikroskopie und Elektronenmikroskopie
• Ermittlung des thermischen Ausdehnungskoeffizienten (-150°C bis 1200°C)
• Beratung und Erprobung von Verfahren zur zerstörungsfreien Qualitätskontrolle
• Delamination vom Verbundwerkstoffen mittels Phased-Array-Ultraschalltechnik
• Dienstleistungen im Gebiet der Zerspanung und Formgebung bzw. Umformung

Ausstattung:

• Servohydraulische Prüfanlage zur Ermittlung des statischen und dynamischen Festigkeitsverhaltens von Bauteilen und Werkstoffen bis zu Belastungen von 250 kN der Firma MTS mit externer Prüffläche für Großaufbauten bis 100 kN 
• 100 kN Prüfanlage von TIRA für Hochtemperaturen von -60°C bis 1200 °C
• Dilatometer von Firma Bähr, Ofen 1 mit -150 °C bis 700 °C, Ofen 2 mit RT bis 1200°C
• übliche mechanische Prüfgeräte (Zug-Druck-Prüfmaschine, Härtemessgeräte für HB, HV, HRB, HRC, Pendelschlagwerke)
• Laboröfen zur Durchführung von Wärmebehandlungsverfahren mit Temperaturen bis zu 1200 °C
• Technik zur Untersuchung von Werkstoffgefügen (Präparationsverfahren, Lichtmikroskopie der Firma Zeiß mit Videotechnik zur Aufzeichnung, Rasterelektronenmikroskop der Zeiss EVO 40)
• Keyence VW-9000 Highspeed-Kamera & 3D-Digitalmikroskop 
• Zerstörungsfreie Prüfgeräte für Qualimetrie und Defektoskopie wie diverse Ultraschallprüfgeräte, Wirbelstromprüfgerät Elotest, Geräte zur Oberflächenrissprüfung, Schichtdickenmessgeräte
• Korrosionsmessungen: OCP, Voltametrie, Immersion, Korrosionsraten, Korrosionsformen
• Ausstattung für Fertigungstechnik: CNC-Drehmaschine, CNC-Bearbeitungszentrum, Universalwerkzeugschleifmaschine, 160 t-Presse, Senkerodiermaschine, 3-Komponenten-Schnittkraftmessplattform, Soft- und Hardware zur Qualitätssicherung, Laborwalze 50 t bis 600 °C, optisches 3D-Messsystem auf Grundlage der Streifenprojektionstechnik

P. Maier, B. Clausius, J. Wicke, N. Hort: Characterization of extruded Mg-Dy-Nd under stress corrosion in C-Ring tests, Metals (2020), 10, 584. DOI: 10.3390/met10050584

J.W. Drelich, M. Sikora-Jasinska, E. Mostaed, H. Liu, P. Maier, J.-M. Seitz, N Hort, Biodegradable Materials for Medical Applications II, JOM (2020) DOI: 10.1007/s11837-020-04129-0

P. Maier, A. Steinacker, B. Clausius, N. Hort: Influence of Solution Heat Treatment on the Microstructure, Hardness and Stress Corrosion Behavior of Extruded Resoloy, JOM (2020) Special Issue: Biodegradable Materials for Medical Applications II, DOI:10.1007/s11837-020-04077-9

P. Maier, A. Richter, M. Wolff, N. Hort: Influence of Nd and La in nanohardness and modulus of elasticity of extruded Mg10Gd evaluated by nanoindentaion, Proceedings of 3rd. Conference & Exhibition on Light Materials, 05.-07.11.2019, Manchester, UK

P. Maier, N. Ostermeier, J. Wicke, S. You, N. Hort: Stress corrosion of the Mg-Zn-Zr alloy system using C-ring tests, MS and T - Materials Science and Technology (2019) 1142-1149, 06.-10.10.2019, Portland, USA, DOI:10.7449/2019mst/2019/mst_2019_1142_1149

P. Maier, N. Lauth, C.L. Mendis., M. Bechly, N. Hort: Mechanical and corrosion properties of two precipitation hardened Mg-Y-Nd-Gd-Dy alloys with small changes in chemical composition, JOM, Volume 71, Issue 4 (2019) 1426–1435, DOI: 10.1007/s11837-019-03359-1, Journal of The Minerals, Metals & Materials Society  

P. Maier, A. Griebel, M. Jahn, M. Bechly, R. Menze, B. Bittner, J. Schaffer, Corrosion bending fatigue of Resoloy® and WE43 magnesium alloy wires, Magnesium Technology 2019, Editors: V.V. Joshi, J.B. Jordon, D. Orlov, N.R. Neelameggham (2019) 175-181 ISBN: 978-3-030-05788-6, 10.03.-14.03.2019, San Antonio, USA, DOI: 10.1007/978-3-030-05789-3_26 

P. Maier, C. Lux, M Polak, N Hort, M Fröhlich: Preliminary results of Y- and Nd-ion implantation on pure Mg, European Cells and Materials Meeting Abstracts, Collection 6, Biometal (2018) 48, ISSN 2522-235X, 10th Symposium on Biodegradable Metals, 26.08.-31.08.2018, Oxford, UK

N. Hort, D. Höche, H. Dieringa and P. Maier: Modelling and Simulation in Materials Engineering, European Cells and Materials Meeting Abstracts, Collection 6, Biometal (2018) 1, ISSN 2522-235X, 10th Symposium on Biodegradable Metals, 26.08.-31.08.2018, Oxford, UK

B. Clausius and P. Maier: Investigation of a partial, inductive short-time heat treatment of thin metal sheets integrated into the forming process, 5th International Conference on New Forming Technology (ICNFT 2018) MATEC Web Conferences 190, (2018) 12008

P. Maier, M. Bechly, C.L. Mendis and N. Hort: Precipitation hardening on mechanical and corrosion properties of extruded Mg10Gd modified with Nd and La, Metals, 8, 640 (2018)

P. Maier, S. Gavras, M. Freese, G. Schott and N. Hort: Microstructural changes of an extruded WE33 alloy during precipitation hardening, Proceedings of Magnesium 2018 - Magnesium alloys and its application, Old Windsor, UK

P. Maier, M. Bechly, B. Hess, M. Freese and N. Hort: Comparative study on corrosion behavior WE33 in immersion and polarization influenced by heat treatment, TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings, The Minerals, Metals & Materials Series, Springer (2018), 227-237.

P. Maier, F. Zimmermann, M. Rinne, G. Szakács, N. Hort and C. Vogt: Solid solution treatment on strength and corrosion of biodegradable Mg6Ag wires, Corrosion and Materials, Vol. 69, Issue 2 (2018) 178-190, DOI: 10.1002/maco.201709502  

P. Maier, M. Bechly, C.L. Mendis and N. Hort: Precipitation hardening on mechanical and corrosion properties of extruded Mg10Gd modified with Nd and La, Proceedings of 2. Conference & Exhibition on Light Materials, 08.-10.11.2017, Bremen, Germany

P. Maier, C. Ruback, E. Rappsilber and H. Schellhorn: Multi-point forming of Al sheets of two thicknesses using elastic cushion, Proceedings of 23. International Symposium of Research – Education –Technology, 12.-13.10.2017, Stralsund, Germany, ISBN 978-3-9817740-2-3, 125-132

P. Maier, M. Bechly and N. Hort: Solid solution treatment on mechanical and corrosion of extruded Mg5Gd compared to pure Mg, Contributed papers from Materials Science and Technology 2017 (MS&T17), International Light Metals Technology Conference (2017), 76-83, 08.-12.10.2017, 2017, Pittsburgh, USA, DOI 10.7449/2017/MST_2017_76_83

P. Maier, C. Ruback, E. Rappsilber and H. Schellhorn: Improvement of formability for multi-point forming of Al and Cu sheets using elastic cushion, Poster Presentation, 12th International Conference on Technology of Plasticity - ICTP2017, 17.-22.09.2017, Cambridge, UK

N. Hort, B. Wiese, F. Witte and P. Maier: Casting: theory and reality, European Cells and Materials Meeting Abstracts, Collection 4, Biometal (2017) 8, ISSN 2522-235X, 9th Symposium on Biodegradable Metals, 27.08.-01.09.2017, Bertinoro, Italy 

N. Hort, H. Dieringa, F. Feyerabend, P. Maier and C. Vogt: Nonsense in Science: Impressions from a reviewer`s every daylife, European Cells and Materials Meeting Abstracts, Collection 4, Biometal (2017) 7, ISSN 2522-235X, 9th Symposium on Biodegradable Metals, 27.08.-01.09.2017, Bertinoro, Italy 

P. Maier, H. Schöning, M. Bechly, G. Szakács and N. Hort: Influence of solution heat treatment on corrosion morphology of Mg4Gd wire, European Cells and Materials Meeting Abstracts, Collection 4, Biometal (2017) 28, ISSN 2522-235X, 9th Symposium on Biodegradable Metals, 27.08.-01.09.2017, Bertinoro, Italy 

P. Maier, A.J. Griebel, W.D. Mueller and J.E. Schaffer: Stress corrosion of cold drawn and aged WE43 wires in different setups, European Cells and Materials Meeting Abstracts, Collection 4, Biometal (2017) 56, ISSN 2522-235X, 9th Symposium on Biodegradable Metals, 27.08.-01.09.2017, Bertinoro, Italy 

P. Maier, C. Ruback, P. Rümmler, E. Rappsilber and H. Schellhorn: Limits in multi-point forming based on a small scaled flexible 9-point die device, AIP Conference Proceedings, Volume 1896, (2017), doi.org/10.1063/1.5007960

P. Maier, L. Gentsch and N. Hort: Voltammetric studies of extruded pure Mg in different electrolytes and its corrosion morphology, Magnesium Technology 2017, Chapter: Biomedical applications, Editors: K. Solanki, D. Orlov, A. Singh, N.R. Neelameggham (2017) 429-437 ISBN: 978-3-319-52391-0, 26.02.-02.03.2017, San Diego, USA, DOI: 10.1007/978-3-319-52392-7_60

P. Maier, J. Gonzalez, R. Peters, F. Feyerabend, T. Ebel and N. Hort: Degradation morphology and pitting factor compared to degradation rate, European Cells and Materials, Vol. 32. Suppl. 6 (2016) 22

A. Steinacker, C.L. Mendis, M. Mohedano, F. Feyerabend, M. Stekker, P. Maier, K.U. Kainer, N. Hort: Microstructure evolution and corrosion behaviour of a biodegradable Mg-Dy-Nd-Zn-Zr alloy, European Cells and Materials, Vol. 32. Suppl. 6 (2016) 11

P. Maier, F. Lenz, G. Tober, M. Kuttig: Distribution of the mechanical properties of a complex deformed component of low carbon steel influenced by post-heat treatment, Applied Mechanics and Materials, Vol. 831 (2016) 63-70, DOI: 10.4028/www.scientific.net/AMM.831.63

P. Maier, R. Peters, C.L. Mendis, S. Müller and N. Hort: Influence of Precipitation Hardening in Mg-Y-Nd on Mechanical and Corrosion Properties, JOM, Volume 68, Issue 4 (2016) 1183-1190, DOI: 10.1007/s11837-015-1762-4, Journal of The Minerals, Metals & Materials Society 

P. Maier, R. Peters, G. Szakács and N. Hort: Role of post-heat treatment on hardness, bending strength and corrosion of Mg4Gd wire compared to pure Mg wire, Magnesium 2015, Proceedings 10th International Conference on Magnesium Alloys and Their Applications, 11.10-16.10.2015, Jeju, Korea, (2015), 376-381

P. Maier, A.J. Griebel, O. Scheffler, J.E. Schaffer: Remaining strength of cold drawn and aged WE43 wires after corrosion, European Cells and Materials, Vol. 30. Suppl. 3 (2015) 47, ISSN 1473-2262, 7th Symposium on Biodegradable Metals, 23.08.-29.08.2015, Brindisi, Italy

R. Peters, P. Maier, C. Mendis and N. Hort: Precipitation hardening on hardness, grain size and corrosion of WE32, European Cells and Materials, Vol. 30. Suppl. 3 (2015) 56, ISSN 1473-2262, 7th Symposium on Biodegradable Metals, 23.08.-29.08.2015, Brindisi, Italy

N. Hort, C. Mendis, P. Maier: Phase Diagrams: Which information’s you can get from them for alloy and process design? European Cells and Materials, Vol. 30. Suppl. 3 (2015) 18, ISSN 1473-2262, 7th Symposium on Biodegradable Metals, 23.08.-29.08.2015, Brindisi, Italy

P. Maier, C. Mendis, M. Wolff and N. Hort: Twinning assisted crack propagation of Magnesium-Rare Earth casting and wrought alloys under bending, Materials Science Forum Vol. 828-829, Editors: H.K. Chikwanda and S. Chikosha (2015) 311-317 7. International Light Metals Technology Conference (LMT2015), July 26-29, 2015, Port Elizabeth, South Africa

P. Maier, G. Szakács, M. Wala and N. Hort: Mechanical and corrosive properties of two magnesium wires: Mg4Gd and Mg6Ag, Magnesium Technology 2015, Editors: M.V. Manuel; A. Singh; M. Alderman; N.R. Neelameggham (2015) 393-398 ISBN: 978-1-119-08243-9,15.-19.03.2015, Orlando, USA

N. Hort, B. Wiese, M. Wolff, T. Ebel, P. Maier: Stiffness of metals, alloys and components, European Cells and Materials, Vol. 28. Suppl. 3 (2014) 1, ISSN 1473-2262, 6th Symposium on Biodegradable Metals, 24.08.-29.08.2014, Maratea, Italy

P. Maier, R. Erdmann, R. Tesch, G Szakács and N. Hort: Influence of corrosion on mechanical properties of Mg5Gd wire, European Cells and Materials, Vol. 28. Suppl. 3 (2014) 36, ISSN 1473-2262, 6th Symposium on Biodegradable Metals, 24.08.-29.08.2014, Maratea, Italy

G. Tober, C, Ruback, M. Kuttig and P. Maier: Influence of heat treatment on rolling and final properties of welded steels 1.4404 and 1.4571, Key Engineering Materials, Vol. 611-612 (2014) 142-148

P. Maier, C.L. Mendis, M. Wolff and N. Hort: Crack Propagation under Bending in Cast Mg10-GdxNd-T4 Alloys, Magnesium Technology 2014, 16.-20.02.2014, San Diego, USA, ISBN: 978-1-118-88816-2, Editors: M. Alderman, M.V. Manuel, N. Hort, N.R. Neelameggham (2014) 77-82

G. Tober, P. Maier, S. Müller and N. Hort: Low Cycle Fatigue Properties of Extruded Mg10GdxNd Alloys, Magnesium Technology 2014, 16.-20.02.2014, San Diego, USA, ISBN: 978-1-118-88816-2, Editors: M. Alderman, M.V. Manuel, N. Hort, N.R. Neelameggham (2014) 115-120

P. Maier, G. Tober C.L. Mendis, S. Müller and N. Hort: Influence of Nd in extruded Mg10Gd base alloys on fatigue strength, Materials Science Forum, Vol. 783-786 (2014) 419-424

C. Mendis, P. Maier, S. Müller, K.U. Kainer and N. Hort: Microstructure Investigation of Mg-10Gd-1La Containing Alloys Subjected to Fatigue Deformation, MS and T 2013, Proceedings Materials Science & Technology Conference and Exhibition 2013, (2013) 1542-1549, Magnesium Technology Symposium, 27.10-31.10.2013, Montreal, Canada

P. Maier, C. Mendis, G. Tober and N. Hort: Tailoring mechanical and corrosive properties of cast Mg10Gd by alloying Nd and heat treatment, Emerging Materials Research, Vol. 2, Issue 5, (2013) 249-258, Themed Issue Magnesium-Based Biodegradable Implants, Guest Editors: W.H. Sillekens and C. Tamerler

P. Maier, G. Tober, C. Mendis and N. Hort: Bending strength and crack propagation in cast Mg10Gd influenced by corrosion, European Cells and Materials Vol. 26. Suppl. 5 (2013) 23, ISSN 1473-2262, 5th Symposium on Biodegradable Metals, 26.08.-31.08.2013, Umang Island, Indonesia

N. Hort, C. Mendis and P. Maier: Do we need alloying elements for Mg implant materials?, European Cells and Materials Vol. 26. Suppl. 5 (2013) 1, ISSN 1473-2262, 5th Symposium on Biodegradable Metals, 26.08.-31.08.2013, Umang Island, Indonesia

P. Maier, A. Richter, G. Tober and N. Hort: Effect of grain size and structure, solid solution elements, precipitates and twinning on nanohardness of Mg-RE alloys, Materials Science Forum Vol. 765 (2013) 491-495 ISBN-13: 978-3-03785-766-3

S. Pott, J. Briesemeister and P. Maier: Retained strength of quasi-isotropic GF-epoxy laminates after dynamic loading at low elongation, ICCS17, 17.-21.06.2013, Porto, Portugal (2013) book of abstract 31

N. Hort, C.L. Mendis, P Maier: Welchen Zweck haben Legierungselemente?, 3. Workshop Neue Horizonte für metallische Biomaterialien, 28.-29.05.2013, Helmholtz-Zentrum Geesthacht, Geesthacht (2013) abstract book 15

P. Maier, C. Mendis, G. Tober, C. Ruback, M. Kuttig and N. Hort: Influence of Neodymium and heat treatment on the mechanical and corrosive properties of cast Mg10Gd base alloy, Magnesium-Based Biodegradable Implants Symposium 2013, Organizer: C. Tamerler, W.H. Sillekens, 03.-07.03.2013, San Antonio, USA (2013) abstract book 218

G. Tober, C. Ruback, M. Kuttig and P. Maier: The effect of work-hardening and heat treatment of mild-carbon steel on cyclic deformation behavior, Characterization of Minerals, Metals, and Materials 2013, 03.-07.03.2013, San Antonio, USA, ISBN 978-1-11860-564-6, Editors: J.-Y. Hwang, C.-G. Bai, J. Carpenter, S.J. Ikhmayies, B. Li, S.N. Monteiro, Z. Peng and M. Zhang (2013) 135-142

P. Maier, O. Anopuo and N. Hort: Microstructural investigation on cyclic deformed Magnesium cast alloys Mg10GdxNd in air and corrosive environment, Developments in Mechanical Engineering, ISBN 978-83-7348-454-2, Editors: J.T. Cieslinski, J.A. Szymczyk, Gdansk University of Technology Publishers, Vol. 5 (2012) 181-190

P. Maier, G. Tober, C. Ruback, M. Kuttig, O. Anopuo and N. Hort: Microstructural Investigation on Extruded Mg10Gd after Exposure to Fatigue and Corrosion, Abstract Book 4th Symposium on Biodegradable Metals, 27.08.-01.09.2012, Maratea, Italy (2012) Page Corr 16-18

K. Krebes, G. Tober, M. Bojar, R. Tschullik, P. Kaeding and P. Maier: Research Study on Structural Low Carbon Steel establishing a New Thick Plate Forming Process, 14th International Conference on Metal Forming “Metal Forming 2012”, Steel Research International, 16.09.-19.09.2012, Krakow, Poland, ISBN: 978-3-514-00797-0 (2012) 939-942

G. Tober, O. Anopuo and P. Maier: Microstructural investigation of carbon steel after hot rolling to optimize complex hot forming of thick plates, Characterization of Minerals, Metals, and Materials 2012, 11.-15.03.2012, Orlando, USA, ISBN 978-1-11829-122-1

P. Maier, S. Müller, H. Dieringa and N. Hort: Mechanical and Corrosion Properties of As-Cast and Extruded Mg10Gd Alloy, Magnesium Technology 2012, 11.-15.03.2012, Orlando, USA, ISBN 978-1-11829-121-4, Editors: S. Mathaudhu, W. Sillekens, N. Hort, N. Neelameggham, (2012) 253-260

G. Tober, O. Anopuo and P. Maier: Lead as Test Rolling Material for Hot Complex Rolling of Steel, International Symposium on Materials Science and Engineering Technology, ISMSET 2011, 30.11.-02.12.2011, Dubai, United Arab Emirates, ISBN 978-3-03785-302-3, Editor: Gary Yang, Advanced Materials Research, Vol. 428 (2012) 84-88

P. Maier, O. Anopuo and N. Hort: Microstructural investigation on cyclic deformed Magnesium cast alloys Mg10GdxNd in air and corrosive environment, 20. Internationale Tagung Forschung, Praxis und Didaktik im modernen Maschinenbau, 21.-23.09.2011, Stralsund, Germany

G. Tober, O. Anopuo and P. Maier: Eigenschaften von Blei bei der Warmumformung in Abhängigkeit verschiedener Umformparameter, 20. Internationale Tagung Forschung, Praxis und Didaktik im modernen Maschinenbau, 21.-23.09.2011, Stralsund, Germany

S. Pott, J. Briesemeister and P. Maier: Mechanische Kennwertermittlung von GF-EP mit unterschiedlichen Probekörpergeometrien und Prüfgeschwindigkeiten, 20. Internationale Tagung Forschung, Praxis und Didaktik im modernen Maschinenbau, 21.-23.09.2011, Stralsund, Germany

O. Anopuo, Y. Huang, N. Hort, K.U. Kainer and P. Maier: Modelling Bolt Load Retention of Ca Modified AS41 Using Compliance-Creep Method, Materials Science Forum Vol. 690 (2011) 278-281

P. Maier, O. Anopuo, F. Malchau, G. Wienck and N. Hort: Cyclic deformation of newly developed Magnesium cast alloys in corrosive environment, Materials Science Forum Vol. 690 (2011) 495-498

J. Gibmeier, P. Maier and C. Fleck: Strain Evolution during Mechanical Loading of the Magnesium Base Alloy LAE442 Studied by means of High Energy Synchrotron Diffraction, Materials Science Forum Vol. 681 (2011) 437-442

J. Gibmeier, C. Fleck and P. Maier: Load Partitioning Studies for the Magnesium Alloy LAE422 using High Energy Synchrotron Diffraction, ECRS8, 8th European Conference on Residual Stress, 26.-28.06.2010, Riva del Garda, Italy

A.K. Mondal, D. Fechner, S. Kumar, H. Dieringa, P. Maier and K.U. Kainer: Interrupted creep behaviour of Mg alloys developed for powertrain applications, Materials Science and Engineering A 527 (2010) 2289–2296

C. Fleck and P. Maier: Fatigue Life and Cyclic Deformation Behaviour of Microalloyed Wrought Magnesium Alloys in corrosive Environments, Magnesium 2010, Editor K.U. Kainer, 8th International Conference on Magnesium alloys and their application, Wiley-VCH Verlag (2010) 1282-1287, ISBN 978-527-32732-4

J. Gibmeier, P. Maier, C. Fleck: Load Partitioning Studies for the Magnesium Alloy LAE422 using High Energy Synchrotron Diffraction, MECA SENS V, 5th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, QuBS2009, The 3rd International Symposium of Quantum Beam Science Directorate, 10.-12.10.2009, Mito, Japan

Y. Huang, H. Dieringa, N. Hort, P. Maier, K.U. Kainer and Y.L. Liu: Evolution of microstructre and hardness of AE42 alloy after heat treatment, Journal of Alloys and Compounds, Volume 463, Issue 1-2 (2008) 238-245

Fechner D, Mondal A K, Kumar S, Dieringa H, Maier P, Kainer K U, Interrupted creep of newly developed high pressure die cast Magnesium Alloys, Processing and Fabrication of Advanced Materials 16 (PFAM XVI) 2007, Editor M. Gupta, T.S. Srivatsan, S.K. Thakur, 16th International Conference, 17.12-19.12.2007, NUS, Singapore (SGP) (ISBN: 978-981-05-9650-7) 561 - 570

P. Maier, C. Fleck: Cyclic deformation of newly developed Magnesium wrought alloys microalloyed with Calcium in corrosive environment, Eurocorr 2007, The European Corrosion Congress: Progress by Corrosion Control, 09.11-13.11 2007, Freiburg  im Breisgau, Germany

F. Witte, F. Feyerabend, J. Fischer, P. Maier, M. Stoermer, C. Blawert, W. Dietzel, N. Hort: Magnesium- hydroxylapatite composite: A novel approach to degradable biomaterials, Biomaterials, Volume 28, Issue 13 (2007) 2163-2174

D. Fechner, P. Maier, N. Hort and K.U. Kainer: Development of a Magnesium recycling alloy based on AM50, Materials Science Forum, Thermec 2006, Vols. 539-543 (2007) 108-113 (DOI: 10.4028/www.scientific.net/MSF.539-543.108)

H. Dieringa, N. Hort, P. Maier and K.U. Kainer: Creep rates of tensile and compressive creep of magnesium alloy AE42 as a consequence of different twinning behaviour, 14th Magnesium Automotive and End User Seminar 2006, Aalen, Germany, 28.-29.09.2006, ISBN: 3-9810476-1-3

D. Fechner, C. Blawert, P. Maier, N. Hort and K.U. Kainer: Development of an AM50 Based recycling alloy, Magnesium 2006, Editor K.U. Kainer, 7th International Conference on Magnesium alloys and their application, Dresden, Germany, Wiley-VCH Verlag (2006) 262-267, ISBN 978-3-527-31764-6, ISBN-10: 3-527-31764-3

F. Witte, J. Fischer, P. Maier, C. Blawert, M. Stoermer, N. Hort: Magnesium-Hydroxylapatite Composites as an Approach to Degradable Biomaterials, Magnesium 2006, Editor K.U. Kainer, 7th International Conference on Magnesium alloys and their application, Dresden, Germany, Wiley-VCH Verlag (2006) 958-964, ISBN 978-3-527-31764-6, ISBN-10: 3-527-31764-3

Y. Huang, N. Hort, H. Dieringa, P. Maier and K.U. Kainer: Investigations on thermal fatigue of aluminium- and magnesium-alloy based composites, International Journal of Fatigue, Volume 28, Issue 10 (2006) 1399-1405

P. Maier, D. Fechner, N. Hort, K.U. Kainer: Recycling von Magnesium; Mg-Werkstoffe, Verfahren, Recycling und Wirtschaftlichkeit, Karosserie II Alternative Fertigungsverfahren, Editor Prof. Dr. J. Remmel, Haus der Technik Fachbuch 64, Expert Verlag, ISBN 3-8169-2606-1 (2006)

N. Hort, Y. Huang, T. Abu Leil, P. Maier, K.U. Kainer: Microstructural Investigations of the Mg-Sn-xCa System, Advanced Engineering Materials Vol. 8, No. 5 (2006) 359-364

H. Dieringa, P. Maier, D. Fechner, J. Bohlen, K.U. Kainer, First Russian International Conference and Exhibition of Magnesium, Broad Horizons, (2005) 29.11-01.12.2005, Moscow, Russia

H. Dieringa, Y. Huang, P. Maier, N. Hort and K.U. Kainer: Tensile and Compressive Creep Behaviour of Al2O3 (Saffil) Short Fibre Reinforced Magnesium Alloy AE42, Materials Science & Engineering A 410-411 (2005) 85-88

P. Maier, K.U. Kainer: Extending the range of applications for magnesium alloys, 2nd International Light Metals Technology Conference, Edited by Helmut Kaufmann, 08.-10.06.2005 (2005) 241-246

P. Maier, K.U. Kainer: Research Program: Extending the range of applications for magnesium alloys, 62nd Annual World Magnesium Conference, International Magnesium association, Wauconda, IL USA, IMA 2005 World Mg Conference (2005) Berlin, Germany, 22.-24.05.2005 

P. Maier, J. Werner Allen, U.J. Gibson, A. Richter and J. BelBruno: Scanning force microscopy study of the morphology of spin-cast molecular imprinted nylon thin films, Surface and Interface Analysis 36 (2004) 1340-1343

P. Maier, R.G. Faulkner: Effects of thermal history and microstructure on phosphorus and manganese segregation at grain boundaries in C-Mn welds, Materials Characterization 51 (2003) Issue 1, 49-62

P. Maier: Virtuelle Medien in den Ingenieurwissenschaften, Wissenschaftliche Beiträge, Technische Fachhochschule Wildau (2003) 46-51

P. Maier, A. Richter, R.G. Faulkner, R. Ries: Application of nanoindentation technique for structural characterization of weld materials, Materials Characterization 48 (2002) 329-339

P. Maier, R.G. Faulkner, P. Spellward, J.R. Cowan: Grain boundary segregation of phosphorous, manganese and carbon in boiler shell weld material, Materials Science and Technology 17 (2001) 1377-1384

P. Maier, R.G. Faulkner, A. Richter and R. Ries: Quantitative Structure Characterisation of Welding Seams by Nanoindentation Technique, Materials Week - Int. Congress on Advanced Materials, their Processes and Applications, September 2000, Munich, Germany

Preise

- Auszeichnung SMART COOP 2020 – Menschen Machen Wirtschaft des Deutsch-Europäischen Genossenschafts- und Prüfungsverband e.V. für 2 Interreg-Kooperationsprojekt(e) der HOST

- Best Paper Application Award: area of application of science in solving a practical problem - TMS2019 - TMS LIGHT METALS: MAGNESIUM “Corrosion Bending Fatigue of RESOLOY® and WE43 Magnesium Alloy Wires” in Magnesium Technology 2019

- Best Poster 10th Biometal 2018 - “Preliminary results of Y- and Nd-ion implantation on pure Mg”

- Best Paper TMS2013 - Characterization of Minerals, Metals, and Materials 2013 - "The Effect of Work-Hardening and Heat Treatment of Mild-Carbon Steel on Cyclic Deformation Behavior”

• Charakterisierung von Mg-Legierungen, Auftragsforschung

- Werkstoffkundliche Untersuchung an neuen gebördelten Halsringen nach partieller induktiver Kurzzeit-Wärmebehandlung, Ministerium für Wirtschaft, Arbeit und Gesundheit MV

- In vivo Studies of biodegradable magnesium based implant materials (MetBioMat), Helmholtz Virtual Institutes - VH-VI-523

- Universalgesenk mit einzelanfahrbaren Stempeln zur Fertigung verschiedener Elemente unter Serienbedingungen, Ministerium für Wirtschaft und Energie

- Düsenform – Umformbarkeit großformatiger Düsen aus Dickblech höherfester Stähle, Ministerium für Wirtschaft und Energie

- InnoRep – Entwicklung innovativer Reparaturverfahren für Faserverbundbauteile für ein RepairKit Ministerium für Wirtschaft, Arbeit und Gesundheit MV

- Verfahrensentwicklung zur 3D Verformung von Grobblech, Ministerium für Wirtschaft, Arbeit und Gesundheit MV

- Reduzierung des Gewichtes von Freiformteilen aus Faserverbundwerkstoffen in Schienenfahrzeugen, Ministerium für Wirtschaft, Arbeit und Gesundheit MV